Physics
The reverse side of a three-pin plug with incorrect connection of wires is shown in the diagram below.
(a) Identify the fault in the above connection.
(b) Mention a risk factor involved, if the user operates the appliance without correcting it.
(c) Will the appliance function in the present situation? (Yes or No)
Household Circuits
1 Like
Answer
(a) Fault in the connection : The live (red) wire is incorrectly connected to the earth terminal (top thick pin) instead of the live terminal and the earth (green) wire is also wrongly connected to the live terminal. Thus, the live and earth wires should be interchanged.
(b) If the appliance is used in this condition, the outer metallic body of the appliance may become live, creating a risk of electric shock to the user.
(c) No, the appliance will not function because the wiring connections are incorrect.
Answered By
3 Likes
Related Questions
Two persons A and B are standing in front of a cliff in the same line 170 m apart as shown in the diagram.
Person B fires the gun and hears the echo in 3 s. Then the person A standing in front of the person B fires the gun.
(Speed of sound in air is 340 m s-1)
(a) Calculate:
- the distance of the person B from the cliff.
- the minimum time in which B hears the gunshot fired by A.
(b) Fill in the blank.
The echo is softer (less loud) than the original sound due to the decrease in …………… [amplitude / frequency] of the wave.
Bulb A rated 160 W, 40 V and Bulb B rated 40 W, 40 V are connected as shown in the diagram.
(a) Calculate the ratio V1 : V2.
(b) If the bulb A fuses, the current in the circuit remains the same. State True or False.
In the combinations of resistors shown below. calculate:
(a) the resistance across AB when the switch S is open.
(b) the resistance across AB when the switch S is closed.
An electric iron rated 1100 W, 220 V is operated for 5 hours.
Calculate:
(a) the minimum rating of the fuse required.
(b) the energy consumed in kWh.
(c) the cost of the energy consumed, if the rate is ₹ 10 per unit.